How do I perform a Quick Check?

How do I perform a Quick Check?

The Quick Check Transmission Test evaluates the overall performance and health of the system prior to taking measurements, and verifies that the SoloVPE transmission is greater than or equal to the transmission tolerance.

Open the SoloVPE Software.

Click on the  “Quick Check” icon located in the tool bar.

Remove any vessel or vessel holders that may be on the detector window.

Insert a new Fibrette and push it all the way until it stops so that it makes contact with the Delivery Fiber. Do not pull it down.

Lower the sample compartment cover.

Press “Start” and follow the prompts.

A green square box indicates transmission higher than 40%, while an orange box indicates 35-39%T, and a red box indicates less than 35% transmission.